半自动模切压痕机 YSH-1100/1300/1450N/1500
全自动模切压痕机 YSH-1100/1080/1060
全自动平压平模切机/排废机 YSH-1050C/1050S
半自动裱纸机(带自动升纸架) YS-1300/1450/1650
高速全自动裱纸机 YSF-1300/1450/1650
高速全自动糊箱机 YS-2000/2400/2800
高速全自动糊折盒机 YS-1100/1200/1380/1450 PC/AC
高速全自动糊折盒机 YS-680/780/PCAC
高速全自动糊折盒机 YS-580C
高速全自动糊折盒机(出口型) YS-1380/1600/1800/2000
高速全自动裱纸机 YSF-1300/1450/1650
高速全自动糊折盒机 YS-550FS
全自动粘箱机 YS-2400
高速全自动糊折盒机 YS-680PC
全自动裱纸机 YSH-1450
全自动平压平模切排废机 YSH-1050S
高速全自动糊折盒机 YS-1380PC
半自动糊盒机 YS-1900
全自动平压平模切烫金机 YSH-1050SF
首页: 您的位置 >> 产品介绍 >> - 高速全自动裱纸机
高速全自动裱纸机
HIGH SPEED AUTOMATIC LAMINATOR

YSF-1300/1450/1650
性能特点
特殊前规定位,定位精确,底纸不超前.
面纸输送采用重叠式走纸方式,送纸更平稳.
采用先进的PLC跟踪技术,根据纸张大小自动调节相参数,使机器运行始终保持在最佳状态.
底纸输送采用可旋转的伸缩式托纸架,更能适用翘曲的瓦楞纸板.

压合辊采用过载保护机构,防止压合辊的意外损伤.
备用堆纸台可在不停机状态下堆放好下一批面纸,沿导轨推入纸台,定位准确,工作效率高.
Speciae Feaures
Fully automatic accordiom type paper and board width    adjustment,
sytsem can be adjusted easily,saving adjustment time.
PVC pressure and convey belt,with high performance of quality and
stabilify,easy maintenance type.
No trouble occurred,even in high speed operation.

Most suitable combiner for since E flute.Bflute,A flute toboard and board.

飞达面纸输送部  FEEDER BRACKET

高效稳定精巧的飞达?#39134;?#35745;,配合吸四送8个吸嘴,
吸纸送纸稳定且适用不同厚度纸张,独特的螺旋后
吸风.前.侧吹风.确保运行减少双张.各吸简单独简
单便调节,确保纸张顺利送出.
Vacuum suction nozzle tvpe feeder paper transmissiom system is
albe to prtpaper accurately into the machine,and iseasy to
operate.The cycllc paper pillng rack can pile up next batch of
paper towelswlthout stop and thus enhances the operating efficiency.

面纸输送部 FACE PAPER CONVEYOR SECTION

传送过程中由前档规配合旁侧拉规输送面纸,系统
原理利用多组电眼感应底纸前进相对位置,发出信
号给位於面纸两侧的独立马达做独立传动补偿上
下纸张对立,精确高速顺畅,面纸经过独立马达调
节纸张棱角定位及时加减与得进?#26800;?#24213;纸对位同步
贴合,贴合准确快速.
Accordion-type paper-width adjusting unit
allows easy adjustment.Upper and lower paper
push claws syncheonously push upper paper
into sticking section.Lateral board aligning
mechanism arranges the pushed paper with
standard sticking precision.The easy-to-adjust
phase adjusting syatem can adjust size accurately
thus substantially reducing losses resulting
from errors.in

吸风底纸输送部

CORRUGATED PAPER CONVEYOR SECTION
强力吸风马达造成的吸力,透过采孔皮带,并配合
单独马达连动画纸运行将底纸紧紧吸附于皮带后直
接输入上涂胶压合部,高速运转时,输出纸张顺利而
精确.
The sustion force produced by the powerful
in-draft motor goes through the holedbelt
thus toabsorb the bodypafferns of at first.The
bady paper will fightly absorbed onto the
belt prior to being transmiffed into mochine.in
high speed operating status,paper issent out
accurately and rapidly. Thus,this belt is
sultable for applications invarious portemo
papers,and 3/5-tiered corrugated paper.

高精密传动系统  TRANSMISSION SYSTEM

采用最经济式的整机传动,一条皮带连动保证机器
运转平稳,噪音更低,产品贴合?#26044;?#20445;持精确.
Adopts HTD synchronous belt as main transmission component  and thus eliminates the disadvanfages intrinsic in conventional  gears and chains such as improper sticking or disalignment  between upper and lower paper sheets due to excessive abrasion  after years of service.As a result,it achieves stable transmission,reduces noises and makes.
电器柜  ELECTRIEAT SECTION

采用我点数PLC集中控制,以独立的硬体实施安全检测诊断.配
以彩色智能显示终端进?#22411;?#22411;,动态化操作及故障点动诊断,以
速度快,精度高,性能稳定,操作维护简捷流畅等优异特点著称,
达到欧同体CE标准.
The operational system The centralized control with multi-counting PLC
isapplied.The independnt hardware will make the safety check diagnoses,
in TFT touching-type isavailable for the operation on the dy namic photos
and the diagnoses on the breakdown.it is famous forits high-speed,high
definition,stable performance and the simple & fast operation maintenance.
It has received the authentication.
压合输送部PRESSURIZED CONVEYOR SECTION

进口高品质的压力输送皮带,持久耐用,稳定性高,易于保养.得用于速
比控制器调速,高速范围更广,适合不同纸张的需求,操作更加简便.
Adopts imported high quality pressurized cinveyor
belt and features dueability,high sfability and easy
maintenance.Uese speed/ration controller to regulate
speed and thus achieves a wide range of high-speed
operation, meets the requirements of different paper
sheets and makes.

技术参数 SPECIFICATION

 型号Model

   YSF-1300

   YSF-1450

    YSF-1650

最大用纸尺寸

  1300*1300mm

  1450*1450mm

    1650*1450mm

最小用纸尺寸

  400*400mm

  400*400mm

    400*400mm

 面纸克重

  250-450/m2

  250-450/m2

    250-450/m2

 适用底纸

  A.  B .  C .  D.  E型瓦楞纸板,厚度≤8mm

 覆贴精度

  2-5mm可调(前规精度:±1.5mm)

 机械速度

 贴合72-164m/min

 贴合72-164m/min

  贴合72-164m/min

 

 面纸 10-32m/min

 面纸 10-32m/min

  面纸 10-32m/min

 生产效率

 2000-6000张/小时

 2000-6000张/小时

  2000-6000张/小时

 总功率

  15kw

 15kw

   18kw

机器外形尺寸

 13.90*2.22*2.68m

 14.10*2.41*2.68m

  15.62*2.61*2.68m

 总重量

  6800kg

 7500kg

   9000kg

 

肇庆市高要区永顺机械有公司版权所有 ©2007-2008
粤ICP备06004231号


中山在线 | | 中山视窗 | 信阳在线 | 江门在线 | 平顶山在线 | 珠海在线 |
拉齐奥足球新闻
两码中特公开 中国福利彩票主持人女 新疆11选5开奖信息 新时时保号法 两码中特公开 福彩快乐20分 安徽时时中奖规则 李逵劈鱼游戏辅助 吉林时时预测软件手机版下载 2018香港开马记录走势图 彩红时时彩计划软件 天天游78ucom 女优网 澳门最大的娱乐网址大全 云南时时记录 云南快乐十分最大遗漏数据